Hantek Digital Storage Oscilloscope DSO2C10 2CH 100Mhz 1GS/s+2D10 Signal Source

Hantek DSO2C10 DSO2D10 Digital Oscilloscope Dual Channel Economical 100MHZ Bandwidth Handheld with Signascilloscopel Source. 1 2 channels, both are respectively controlled by independent knobes.

1 GSa/s real-time sample rate. 6 Built-in 1 CH 2. 5MHz waveform generator(ONLY 2D10 5MHz Waveform Generator). 9 CAN decode and protocol analysis. 10 Can save as multiple data formats, such as setting, waveform, referance waveform, CSV, picture. 5 bits digital voltage meter and 6 bits hardware frequency indicator function. 12 32 kinds of auto measurements with statistics, real-time statistics of maxmum, minimum, standrad deviation and etc. 13 2 sets of digital voltmeter. 14 Support threshold testing, free measurements within the screen. DSO2C10 have no waveform generator function! 1GSa/s (single channel) 500MSa/s (two channels). Display high frequency and random burr.

Average waveform, times: 4, 8, 16, 32, 64, 128. 2ns/div100s/div 1, 2, 5 step by step. ±0.5 div×minimum time base gear.

Sample Rate and Delay Time Accuracy. Delta Time Measurement Accuracy (Full Bandwidth)Sample Rate and Delay Time Accuracy. ±50ppmat any interval greater than 1ms. Rising time in BNC position (typical). 8 bits resolution, each channel samples simultaneously. +, -, ×, ÷, FFT. Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop. In''normal'' or''average'' acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%. In''normal'' or''average'' acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%. Note: Bandwidth reduced to 6MHz when using a 1X probe. Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC.

±5 divisions from the center of the screen. ±4 divisions from the center of the screen. EXT(Only With AWG Model). 0.2 div×volts/div within ±4 divisions from the center of the screen.

Rising edge, falling edge, rising or falling edge. Scanning line, line number, odd field, even field, all field. 0: low level; 1: high level; X: ignore. Start, Stop, data, Parity ERR, COM ERR. 5 bit, 6 bit, 7 bit, 8 bit.

Interval field, synchronization field, ID field, synchronization error, identifier, ID and data. Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame. 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000. 4, 8, 16, 24, 32. Start bit, stop bit, No Ack, address, restart, address and data. Voltage difference between cursors V. Time difference between cursors T. Reciprocal of T, in Hertz (1/T).

Frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF. Hardware 6 bits frequency meter. Arbitrary waveform generator (Only for DSO2D10). Sine, square, ramp, Exp, noise, DC. 0.1 Hz to 10 MHz.

0.1 Hz or 4 bitstake the greater one. ±3.5 V, high impedance. 100 V or 3 bits, take the greater one. 800 (horizontal)480 (vertical) pixels. 16 million colours (24 bits true colour).

Minimum, 1 s, 5 s, 10 s, 30 s, infinite. About 2Vpp input 1M load.

(±10%), 45Hz to 66Hz, CAT. T, 3.15A, 250V, 5x20mm. 40+71 °C (-40159.8 °F).

+104(+40°C): 90% relative humidity. 106122 (+41°C 50°C): 60% relative humidity. 3, 000m (10, 000 feet). 10 minutes on each axis.

318 x 110 x 150mm (length x width x height). The item "Hantek Digital Storage Oscilloscope DSO2C10 2CH 100Mhz 1GS/s+2D10 Signal Source" is in sale since Friday, November 20, 2020.

This item is in the category "Industrial\Test, Measurement & Inspection\Analysers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "mrtech-instrument" and is located in Shenzhen. This item can be shipped worldwide.

Number of Channels: 2
Modified Item: No
Custom Bundle: No
Maximum Real-Time Sampling Rate: 1 GSa/s
Oscilloscope Type: Digital Oscilloscope
Product Type: Oscilloscopes
Installed Options: NO
Features: Handheld/ Portable
MPN: Does Not Apply
Brand: Hantek
Maximum Bandwidth: 100MHz
Digital Oscilloscope Resolution: 8-bit