Osciloscopio Portable PC Based Lcd Digital Multimeter USB 100MHz 2CH Storage

  

Hantek DSO5102BM Osciloscopio Portable PC Based Lcd Digital Multimeter Oscilloscope USB 100MHz 2CH Storage Diagnostic-tool. 1GSa/s Real Time sample rate. Large (7.0-inch) color display, WVGA(800x480). Record length up to 2M. Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.

USB host and device connectivity, standard. Four math functions, including FFTs standard. Provides software for PC real-time analysis.

Single-channel: Maximum 2M; Dual-channel:Maximum 1M (4K, 16K, 40K optional). 4nS/div-40S/div (in a 2, 4, 8 sequence).

8-bit resolution, each channel sampled simultaneously. ±50V(5V/div), ±40V(2V/div500mV/div), 2V(200mV/div50mV/div)±400mV(20mV/div2mV/div). ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div. Trigger Sensitivity (Edge Trigger Type). DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity.

CH1, CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V. Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times 20ns). CH1, CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV).

Trigger on the rising or falling edge. Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM). From the rising or falling edge Set Time: 20-10s. Internal trigger on edge, pulse width, video or slope.

Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz. Tracing: The voltage and time at a waveform point. Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width.

Right angle 7TFT 16-digit color LCD. 16 gears, with the progress bar to show adjustment. USB host and USB slave. 100-120VACRMS(±10%), 45Hz to 440Hz, CAT II 120-240VACRMS(±10%), 45Hz to 66Hz, CAT II.

Length: 313mm Width: 108mm Height: 142mm. 2.08KG (exclusive of packing and accessories). Operating system: Windows 7, Windows NT, Windows 2000, Windows XP , VISTA. The item "Osciloscopio Portable PC Based Lcd Digital Multimeter USB 100MHz 2CH Storage" is in sale since Monday, August 20, 2018. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes".diy" and is located in SHENZHEN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

1. Brand: Hantek
2. Record Length: 2M
3. Display Size: 7 Inches & Above
4. Real Time Sampling Rate: 1GSa/S
5. Max Waveform Capture Rate: 30,000wfm/s
6. Band Width: 100-349MHz
7. Model: DSO5102BM
8. DIY Supplies: Electrical
9. MPN: Does Not Apply
10. Display resolution: 800*480 Pixels
11. Model Number: DSO5102BM
12. Digital Channels: 2