1013D Mini 7 Touch Panel 2CH Digital Oscilloscope 100MHz Bandwidth 1GS With USB

1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by FNIRSI for the maintenance and R & D industry. This oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100MHz 2. With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals. The built-in high-voltage protection module can tolerate a continuous voltage of up to 400V.

Oscilloscope burnout accident caused by the probe being turned to the 10X position. Large time base scroll mode can monitor slow level changes. Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments; the display is equipped with a 7-inch 800 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient. Cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion.

Extremely convenient screenshot And waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient. The powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.

The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal. Built-in 6000mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook. Intelligent anti-burn, 1X Can withstand up to 400V withstand voltage. Fully fit 7 inch 800 480 resolution color TFT LCD display with bright colors and high contrast.

Capacitive touch screen, the same as the touch mode of modern mobile ipad, is not a resistive touch. Screen with ancient nail operation. High measurement voltage range, 1X can measure 0 40 V, 10X can measure 0 400V, 100X can measure 0 4000V.

Up to 12 parameters measurement:VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period. Cursor measurement function, it is convenient to manually measure the period and frequency voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen.

Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.

Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing. Page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.

Lissajous figures graphic display function can be used to determine the amplitude, frequency. And phase contrast of two groups of signals.

FFT display function, can analyze the spectral characteristics of the signal. Built in 6000mAh rechargeable lithium battery, Fully charged for 4 hours of continuous use at the.

Memory compression technology, waveform refresh screen does not flicker. Ultra thin, easy to carry.

Analog band width: 100MHz 2. Number of channels:2 channels.

Maximum real time sampling rate: 1GSa/s. Vertical sensitivity: 50 mV/div 500 V/div. Horizontal time base range: 50S/div 10nS/div. Maximum test voltage: 40 V (1X probe), 400 V (10X probe). Trigger mode: Single, Normal, Auto.

Trigger edge: Rising edge/Falling edge. External trigger voltage 0 - 40 V. Display: 7 inch - 800480. Operating: Capacitive touch screen + gesture. Extension ports:USB picture export. Power supply: 6000 mAh lithium battery. Size: 184mm x 124mm x 50mm. 1 x FNIRSI-1013D oscilloscope host. 2 x Matching 100MHz probe(1X and 10X). 1 x 5V2A Charger(Include USB data line). 1 x User manual (English).

This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "wandar66" and is located in this country: CN. This item can be shipped to United States, all countries in continental Asia, Canada, United Kingdom, Germany, France, Australia.

Brand: Unbranded
Maximum Bandwidth: 100MHz
Number of Channels: 2
Features: Handheld/ Portable, With USB
Maximum Real-Time Sampling Rate: 1 GSa/s
Model: 1013D
Modified Item: No
Country/Region of Manufacture: China
Type: Storage Oscilloscope
Power supply: 6000mAh lithium battery
Display: 7 inch - 800*480
Trigger Mode: Single, Normal, Auto
Select Type: 100MHz 1GS Storage Oscilloscope
ADC precision: 8bits
Storage depth: 240Kbit
Analog band width: 100MHz
External trigger voltage: 0 – 40V
Operating: Capacitive touch screen + gesture
Vertical sensitivity: 50 mV/div ~ 500 V/div
Input resistance: 1M
Coupling mode: AC/DC
Trigger edge: Rising edge/Falling edge
Extension ports: USB picture export
Horizontal time base range: 50S/div ~ 10nS/div
Oscilloscope Type: Digital Oscilloscope