3 In 1 Oscilloscope Multimeter 2.8in LCD 80MHz 2 Channel Oscilloscope Multimeter

  
3 in 1: This meter has the functions of oscilloscope, multimeter and waveform generator, with 2.8in high resolution, high contrast color LCD, compact but with strong functions, suitable for outdoor use. Digital Multimeter: Digital multimeter is used to measure AC DC voltage current, resistance, diode, capacitance and on off test, with high sensitivity, high accuracy, clear display, strong anti overload capability. Long Battery Life: Powered by 4000mAh lithium battery, can be used for about 10 hours after full charged, with ultra low comprehensive power consumption, which is less than 3W. Excellent Performance: 80MHz Handheld oscilloscope has 2 channel 200Msps sampling rate, has two acquisition modes, high refresh, depth storage, automatic measurement, cursor measurement and saving functions. Waveform Generator Function: Feature 5Vpp, 3Vpp, 2Vpp, 1Vpp, 500mVpp, 200mVpp, 100mVpp, 0Vpp waveform amplitude range.

The maximum length of single channel is 6K, of dual channel is 3K. With 8 bit vertical resolution and 1M?

Item Type: Oscilloscope Multimeter Material: ABS Screen: 320 x 240 resolution, 2.8 inch TFT color screen approx. 58x45mm/2.3x1.8in Backlit Brightness: Adjustable Backlit Time: 30-120s (self settable), automatic dark screen in case of no operation Battery: 2 x 2000mAh lithium ion battery (built in) Automatic Shutdown: 15-60min (self setting) automatic shutdown in case of no operation Charging Interface: Type C Service Time: About 10 hours Data Record: Record 2000 DMM data and 200 OSC waveforms Digital Storage Oscilloscope Function: Analog Bandwidth: 80MHz Maximum Real Time Sampling Rate: 200Msps Vertical Direction: 8bit Horizontal Square: ±1bit Number of Channels: 2 Coupling Mode: DC, AC, GND Input Impedance: About 1M? Index: 4.0 in vertical direction and 6.0 in horizontal direction Vertical Sensitivity Range: Input BNC, 10mV/div to 10V/div time base range: 5ns/div to 50s/div, 1 2 5 steps Vertical Amplitude Accuracy: ±(5%+0.2div) Time Base Accuracy: ±(0.01+0.1div) Automatic Reference: DC measurement Scanning Mode: Automatic, normal, single Trigger Level: ±4div (0.04div per level) Trigger Slope Selection: Rise, fall, double Trigger Position Adjustment: ±4div (0.04div per stage) Automatic Setting: Automatic setting of time base and vertical amplitude Cursor Measurement Function:? T Time Measurement Parameters: Frequency, period, +width, -width, +duty cycle, -duty cycle Automatic Measurement Accuracy: ±(5%+0.2div) Record Length: Maximum 6K for single channel, maximum 3K for dual channels Signal Source Characteristics: Waveform Frequency: Positive : 1Hz to 5MHz Square : 10Hz to 1MHz Triangular : 10Hz to 1MHz Waveform Amplitude: 5Vpp, 3Vpp, 2Vpp, 1Vpp, 500mVpp, 200mVpp, 100mVpp, 0Vpp.

To fully the battery, it takes up to 4.5 hours (when the device is turned off) or subject to charging indicator. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.

If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.