Digital FNIRSI-1013D 7 inch Storage Oscilloscope 100MHz Bandwidth Sampling Rate

  
Digital FNIRSI-1013D 7 inch Storage Oscilloscope 100MHz Bandwidth Sampling Rate. FNIRSI-1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by FNIRSI for the maintenance and R & D industry. This oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100MHz 2. With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals. The built-in high-voltage protection module can tolerate a continuous voltage of up to 400V. Oscilloscope burnout accident caused by the probe being turned to the 10X position. Large time base scroll mode can monitor slow level changes. Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments.

The display is equipped with a 7-inch 800 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient. Cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion.

Extremely convenient screenshot And waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient. The powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal. Built-in 6000mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook.

14:Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis 15:Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals 16:FFT display function, can analyze the spectral characteristics of the signal 17:Built in 6000mAh rechargeable lithium battery, Fully charged for 4 hours of continuous use at the highest screen brightness 18:Memory compression technology, waveform refresh screen does not flicker 19:Screen brightness adjustment 20:Background grid brightness adjustment 21:Ultra thin, easy to carry. 1:Analog band width: 100MHz 2 2:Number of channels:2 channels 3:Maximum real time sampling rate: 1GSa/s 4:Vertical sensitivity: 50 mV/div 500 V/div 5:Horizontal time base range: 50S/div 10nS/div 6:Maximum test voltage: 40 V (1X probe), 400 V (10X probe) 7:Storage depth: 240Kbit 8:Input resistance: 1M 9:ADC precision: 8bits 10:Coupling mode: AC/DC 11:Trigger mode: Single, Normal, Auto 12:Trigger edge: Rising edge/Falling edge 13:External trigger voltage 0 - 40 V 14:Display: 7 inch - 800480 15:Operating: Capacitive touch screen + gesture 16:Extension ports:USB picture export 17:Power supply: 6000 mAh lithium battery 18:Size: 184mm x 124mm x 50mm 19:Total weight:650g. 1 x FNIRSI-1013D oscilloscope host 2 x Matching 100MHz probe(1X and 10X) 1 x 5V2A Charger(Include USB data line) 1 x User manual (English). Please Make sure it's 100% right. Please leave note for your special request e.

Feedback is very important to us. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

This item is in the category "Business, Office & Industrial\Test, Measurement & Inspection\Analysers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "moduleme" and is located in this country: CN. This item can be shipped worldwide.

1. select: Type 2
2. Features: Handheld/ Portable
3. Maximum Real-Time Sampling Rate: 1 GSa/s
4. Modified Item: No
5. Number of Channels: 32
6. Country/Region of Manufacture: China
7. Trigger Mode: Single, Normal, Auto
8. Oscilloscope Type: Digital Oscilloscope
9. ADC precision: 8bits
10. Storage depth: 240Kbit
11. Maximum Bandwidth: 100MHz
12. Model: 1013D
13. External trigger voltage: 0 – 40V
14. Coupling mode: AC/DC
15. Select Product: FNIRSI 1013D 100MHz+1Gsa/s
16. Trigger edge: Rising edge/Falling edge
17. Operating: Capacitive touch screen + gesture
18. Vertical sensitivity: 50 mV/div ~ 500 V/div
19. Brand: FNIRSI
20. Analog band width: 100MHz * 2
21. Input resistance: 1M
22. Marke: Markenlos
23. Horizontal time base range: 50S/div ~ 10nS/div
24. Extension ports: USB picture export
25. Type: Storage Oscilloscope