Digital Storage Oscilloscope

Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth

Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth

Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth   Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth

Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth. 1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope for the maintenance and R & D industry. Intelligent anti-burn, 1X can withstand up to 400V withstand voltage.

Fully fit 7 inch 800 480 resolution color TFT LCD display with bright colors and high contrast. Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation.

High measurement voltage range, 1X can measure 040V, 10X can measure 0400V, 100X can measure 04000V. Up to 12 parameters measurement:VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period. Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic).

At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot.

Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.

FFT display function, can analyze the spectral characteristics of the signal. Built in 6000mAh rechargeable lithium battery, fully charged for 4 hours of continuous use at the highest screen brightness. Memory compression technology, waveform refresh screen does not flicker. Ultra thin, easy to carry. Analog band width: 100MHz 2. Number of channels: 2 channels. Maximum real time sampling rate: 1GSa/s. Vertical sensitivity: 50 mV/div500 V/div.

Horizontal time base range: 50S/div10nS/div. Maximum test voltage: 40V (1X probe), 400V (10X probe). Trigger mode: Single, Normal, Auto.

Trigger edge: Rising edge/Falling edge. External trigger voltage: 040 V. Display: 7 inch - 800480. Operating: Capacitive touching screen + gesture. Extension ports: USB picture export.

Power supply: 1 lithium battery, 6000mAh (included). Item size: 184 124 50mm / 7.2 4.9 2.0in.

Package size: 230 150 60mm / 9.1 5.9 2.4in. Package weight: 1000g / 2.2lb. 2 Matching 100MHz Probe (1X and 10X). Type1 :kkm828 Digital Oscilloscope Multimeter. Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life. Oscilloscope multimeter 2 in 1, improve your work efficiency. One-button oscilloscope: no need oscilloscope probe, measuring waveform directly.

Fast and accurate measurement, clear waveform display. 240320 high definition color screen: the color display is clearer, and the secondary display at the bottom provides more function menus.

Multimeter measurement functions: AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, diode test, continuity test. Storage: mass storage, 100 data/10 waveforms. Input voltage is greater than 24V, beep warning once.

Input over range, beep warning. Same screen display: historical records and real-time data are displayed on the same screen for easy comparison and analysis of data. Buttons and dial: silicone button, sensitive pressing function dial, accurate gear. Back bracket: the back bracket is tilted at 60° for easy viewing.

Display area: about 2.4 inches. Battery: 3 AA battery (not included). Use time: low light about 5 hours. Real-time sampling rate: 2.5Msps. Multimeter measurement: automatic range + manual range.

Oscilloscope function secondary display: VP-P, average value, effective value, frequency, time base, amplitude. Item size: 160 83 32mm / 6.3 3.3 1.3in. Item weight: 195g / 6.9ounce.

Package size: 190 140 45mm / 7.5 5.5 1.8in. Package weight: 370g / 13.1ounce.

Range: 0.1nF100, 10.00mF. Diode test: voltage is about 5V, test current is about 1.5mA. Continuity test: judgment resistance about. 1 Pair of Test Pens.

This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "rideksshop" and is located in this country: CN.

This item can be shipped worldwide.
  1. Color: Type 1
  2. Number of Channels: 2
  3. Model: 1013D
  4. Country/Region of Manufacture: China
  5. Maximum Real-Time Sampling Rate: 1 GSa/s
  6. Oscilloscope Type: Digital Oscilloscope
  7. Digital Channels: 2
  8. Display resolution: 800*480 Pixels
  9. Features: With USB
  10. Display Size: 7 Inches & Above
  11. DIY Supplies: ELECTRICAL
  12. MPN: 7491243570
  13. Input resistance: 1MΩ
  14. Waveform measurement: 14 types
  15. One key automatic: Support
  16. Real Time Sampling Rate: 1GSa/S
  17. Record Length: Storage depth: 240Kbit
  18. Sampling rate: 500M
  19. Analog brandwidth: 110M
  20. Brand: Meterk
  21. Time base range: 5ns-10s
  22. Maximum Bandwidth: 100 MHz
  23. Band Width: 100-349MHz
  24. Trigger mode: Auto/normal/single
  25. Battery: 1 * lithium battery,3000mAh
  26. Vertical sensetivity: 20mV/div-100V/div
  27. Digital Oscilloscope Resolution: 240Kbit
  28. Channel coupling: AC/DC

Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth   Digital Oscilloscope ABS TFT LCD Screen USB Storage 2Channel 100MHz Bandwidth