DS213 MINI DSO 4-channel 100MS/S DSO213 Nano Quad Pocket Digital Oscilloscope

  
Mini DSO Pocket Size DSO213 Digital Oscilloscope USB Handheld. Oscilloscopes Kit Analog Bandwidth Osciloscopio DS213. DS213 is a "5-track, 4-wave line" digital storage oscilloscope for general-purpose electronic engineering. Task and it is based on ARM Cortex M3 core. DS213 uses FPGA to manage external ADC's control and data cache mode.

It provides 4 application partitions for loading and upgrading up to 4 different application firmware. It also has built-in 8MB USB flash drive for storing waveforms and upgrading system firmware. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware according to their needs. L Mini size, light weight, portable and handheld.

L It can store waveforms, making waveform analysis clearer and more effective. L Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger. L Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width. Analog Channels: 2([CH_A] [CH_B]). Digital Channels: 2([CH_C] [CH_D]).

Vertical Sensitivity: 10mV-10V/div (1-2-5 STEP) (using X1 probe). 100mV-100V/div (1-2-5 STEP) (using X10 probe). Sample Memory Depth: 4 channels, 44K. Max Input Voltage: ±40Vpp (using X1 probe). Trigger Types: Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger. Trigger Mode: Auto, Normal, Single, Slow. Trigger Source: [CH_A] [CH_B] [CH_C] [CH_D]. Signal Source: Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources.

Sine/Triangle/Sawtooth Wave: 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources. Storage: built in 8M USB disk. Auto Measurement Types: Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average. Cursor Measurement: Time value, Amplitude value. Display Modes: 4 wave lines: Line 1: [CH_A], HIDE.

Line 3: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE. Size: 99.5mmx58.5mmx13.5mm. 1 x DS213 Digital Oscilloscope. CCDSO Mini Digital Oscilloscope DS212 DSO212 Nano Portable Thumb Wheel 1MHz 8MB LCD Display Handheld Pocket Osciloscopio.

Pocket-sized digital storage oscilloscope meets basic electronic engineering requirements. Dual trace three lines, new kind of system interface, capacitive convenient operation. The aluminum shell is very fashionable equipped with 320240 color display, 8M. Memory card (USB flash disk), and chargeable Lithium batteries. The thickness is about 11 mm/ 0.43 inch only!

The volume is small enough to take it anywhere. It can meet the demands in many fields, such as, school experiments, electronic repairing, and electric engineering. Modes: Vertical and horizontal precise measurement and trigger threshold. Synchronous mode: Auto, Normal, Single, None, Scan.

Trigger mode: Rising/Falling edge trigger. Auto measurement:frequency, cycle time, duty cycle, DC RMS voltage/ Vpp / Vmax/ Vmin/ Vavg.

Inbuilt signal Generator:10Hz1MHz square wave (duty adjustable) or 10Hz20KHz Sine/ Square/Triangle/Sawtooth wave. Storage:Inbuilt 8MB U disk storage for waveform data and images. Battery:Internal 500mAh Lithium battery, external USB port. Display:Color TFT LCD display (320X240 pixels).

Maximum sample memory depth:8K. Maximum input voltage:±40V(X1 probe). Vertical sensitivity:20mv/Div10V/Div (in 1-2-5 sequence step). Horizontal sensitivity:1uS/Div2S/Div(in 1-2-5 sequence step).