Digital Storage Oscilloscope

ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201


ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201
ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201
ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201
ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201
ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201
ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201

ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201    ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201

Combination of 4000 count auto-range true RMS DMM and multimeter. DMM functions includes true RMS AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, dBm, diode and continuity tests. Full auto-setup for volt/division and time/division of DSO.

Save and recall up to 100 waveform and data. High contrast FSTN LCD with white LED backlight. Auto power off in 5 to 60 minutes or continuous on. Inner Li-ion polymer battery with AC adapter.

Isolated USB/RS232 interface with PC. Vertical ±4.8, horizontal 12.8. ±(0.01% + 0.1div).

± 12 div (At each step, 0.1div). ± 6 div (At each step, 0.1div). When the vertical amplitude and automatic Settings. 20MHz refers to simulate bandwidth to 3db voltage when the attenuation of bandwidth, when the input signal interference, change with ADP08 and special high frequency shield. 1-2-5 for vertical attenuation switch range.

±(0.8%rdg + 10dgt). ±(1.5%rdg + 10dgt). 50Hz400Hz ±(1.2%rdg + 10dgt) 400Hz2kHz (10kHz These will not be examined) ±(2.0%rdg + 10dgt). ±(1.5%rdg + 10dgt) (50Hz400Hz). ±(1.2%rdg + 10dgt).

±(1.5%rdg + 10dgt) 50Hz2kHz 5kHz These will not be examined. ±(1.0%rdg + 5dgt).

±(3.0%rdg + 5dgt). ±(2.0%rdg + 10dgt). ± (1.0% rdg + 5dgt), (signal amplitude is not less than 1Vp-p, AC V or 20mA RMS, AC A). 0.199.9% (AC 1Vp-p).

Open circuit voltage of about 1.5 V, the maximum test current of about 1.5mA. Can be applied to each measurement function. Multimeter to measure the rate of. 2.5 times / second. Continue after the main display dynamic refresh to keep the actual measurement data. DB (-80 +80 dB) reference impedance. 2, 3, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, 1200? 128 x 128 pixel graphic LCD. 71.7mm x 71.7mm. White LED, 3 levels of brightness.

Inner Polymer Li-Ion Battery or AC adapter. 560minutes adjustable with disable feature. 100 records (both DMM data and DSO waveform). 0°C to +50°C (+32°F to +122°F). 10°C to +60°C (-14°F to 140°F).

86mm x 186 mm x 32mm. 1 2 in 1 Digital Storage Oscilloscope 1 Pair of Test Probes 1 USB Cable 1 Charging Plug 1 Carrying Bag 1 User Manual(English).


ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201    ET310A 2 in 1 20MHz 80Msa Digital Handheld Storage Oscilloscope Multimeter ET201