- Index
- Band Width
- Brand
- Model
- 1013d (69)
- 1014d (17)
- 6074bc (45)
- 6104bd (13)
- 6204bd (12)
- Digital Oscilloscope (11)
- Ds213 (24)
- Dso2c10 (29)
- Dso2c15 (21)
- Dso2d15 (17)
- Dso4254c (15)
- Dso5102p (21)
- Fnirsi-1014d (50)
- Hantek6104bc (12)
- Ht-dso4104c (11)
- Jds2022a (25)
- Oscilloscope (11)
- Storage Oscilloscope (23)
- Vds1022i (20)
- 2230 (17)
- Other (2181)
- Model Number
- Record Length
- Sample Rate
- 00msa / S (3)
- 1 Gsa / S (33)
- 10 Msa / S (2)
- 100 Mhz (3)
- 100 (2)
- 100 Msa / S (6)
- 100msa / S (4)
- 1gs / S (9)
- 1gsa / S (74)
- 1gsa / S-25gsa / S (2)
- 2.4msa / S (17)
- 200 Mhz (3)
- 200 Msa / S (7)
- 200msa / S (16)
- 250ms / S (5)
- 250msa / S (4)
- 48ms / S (8)
- 500 Msa / S (7)
- 500ms / S (2)
- Less Than 200msa / S (12)
- Other (2425)
Fluke SCOBEMETER 99B Series II DSO Digitales Speicheroszilloskop Digital Storage
Fluke SCOBEMETER 99B Series II DSO Digitales Speicheroszilloskop Digital Storage. Fluke Model 99B Series II ScopeMeter Gebrauchtes Produkt, optische Nutzungsspuren, welche die technische Funktion in keinster Weise beeinträchtigen. Das Akkupack ist nicht inklusive, kann aber auf Wunsch mit erworben werden (neu). Jegliche externe DC Spannungsquelle von 8-20V kann genutzt werden um das Scopemeter mit Spannung zu versorgen. Das Original-Netzteil Fluke 15 Volt power pack ist natürlich inklusive.
Das Nutzerhandbuch für das 99B ist on-line verfügbar und weist die tatsächliche Bandbreite der Messmöglichkeiten des Oszilloskops auf. Bei Wahl der Messfunktionen stellt das Scopemeter automatisch den besten Modus zur Analyse und dem Vergleich von komplexen Wellenformen oder zum Ablesen der Spannungswerte ein.
ScopeMeter test tool Funktionen beinhalten: - Digitales Speicheroszilloskop - 3 2/3-digit, 5-MHz Digital MultiMeter (DMM) - Akku-Spannungsversorgung - Menü für schnelles Setup - fortlaufende Auto-Set funktion für vollautomatische Wertemessung - Large memory for front panel Setups, Waveforms, and Screens - Min Max Kurvenfunktion mit Zeitstempel für Langzeitaufnahme. Ich übernehme / biete keinerlei Garantie, Gewährleistung noch Rückgaberecht. Used product but in good working condition with some cosmetic wear that doesn't affect it's working order. The battery pack isn't included but can be bought separately (new).
Any external DC supply from 8 to 20 volts can also be used to power the scopemeter. The original Fluke 15 Volt power pack is supplied with the scope. The user manual for the 99B is readily available on-line, and shows the wide range of measurements that can be made automatically. When selecting a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.ScopeMeter test tool features include: - Digital Storage Oscilloscope - 3 2/3-digit, 5-MHz Digital MultiMeter (DMM) - Battery Power - Measure menu for quick setup - Continuous Auto Set function for hands-off signal probing - Large memory for front panel Setups, Waveforms, and Screens - Min Max TrendPlot function with time stamp for long term recording - Instant Information key Specifications (Scope Mode): Vertical: - Bandwidth - 100 MHz - Sensitivity - 1 mV to 100 V/div (With 10:1 probe measure up to 600 Vrms) - Vertical Resolution - 8 bits (256 levels) - Modes - A, -A, B, -B, A+B, A-B, X vs Y - Coupling - AC, DC, GND Horizontal: - Range - 5 ns/div to 60 s/div - Acquistion Modes - Recurrent, Single shot, Envelope, Roll, Glitch detect, Average, ScopeRecord - Sample Rate - 5 GS/s for repetitive signals; 25 MS/s for single shot - Maximum record length - Scope Record 30k up to 20 ms/div for 1 ch. 15k up to 2 ch. Trigger: - Source - Input A, Input B, External - Modes - Free run, Triggered, Single - Types - Edge, Video, Event, N-cycle - Time Delay - Up to 20 divisions pre trigger view, up to 640 divisions trigger delay Cursor Measurements: - Displayed Simultaneously - 5 - Measurements - Vrms, Frequency, V(mean), Risetime, Vpeak-peak, Time between cursors, Vmaxpeak, Time at cursors (Time of day or Time from start), Vmin-peak, Phase dV between cursors, V at cursors Waveform Mathematics: - Type - Add, multiply, filter, subtract, invert, integrate. Instantaneous or mean watts with optional current probes.
Allows full 30k record overview, or zoom in to single sample resolution. Specifications (Meter Mode): - DC Voltage - 100 mV to 300 V (600 Vrms with 10:1 probe) - AC Voltage - 100 mV to 250 V (600 Vrms with 10:1 probe) - Additional Measurements - Continuity, Diode test, Amps, Hz, Pulse Width, Duty Cycle, RPM, dBm, dBV, dBW, Audio or RF Watts - Ohm Mode - Ranges, 30 Ohms, 300 Ohms...........
3 M Ohms, 30 MOhms - Ohm Accuracy - 300 Ohms to 30 MOhms +/- 0.5% + 5 counts Die oben genannten Spezifikationen sind nur auszugsweise, der volle Funktionsumfang für die Serie des Modell 99B II ist weitreichender und kann on-line dem Nutzerhandbuchs entnommen werden. The above specifications are partial only, the full specifications for the Model 99B series II is extensive and can be found on-line as part of the User Manual. Ich übernehme/biete keinerlei Garantie, Gewährleistung noch Rückgaberrecht. The item "Fluke SCOBEMETER 99B Series II DSO Digitales Speicheroszilloskop Digital Storage" is in sale since Tuesday, December 22, 2020.
This item is in the category "Business & Industrie\Elektronik & Messtechnik\Mess- & Prüftechnik\Analysatoren & Datenerfassung\Oszilloskope & Vektorskope". The seller is "0911ninja" and is located in Nürnberg. This item can be shipped worldwide.
- Produktart: Digitales Speicheroszilloskop (DSO)
- Maximale Bandbreite: 5MhZ DMM/Vertical 100 Mhz
- Marke: Fluke
- Herstellernummer: 99B