FNIRSI-1014D is a two in one oscilloscope and signal generator, the real-time sampling rate is 1GSa / s and with 100MHz 2 ana-log bandwidth, with 7inch TFT LCD display screen, the built-in high-voltage pro-tection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear. Come on and try it, it will not let you down.
Features: Built in DDS signal generator, support 12 kinds of function signal. Capture output signal function, which can store up to 1000 capture signals. Targeted high intelligent decoding algorithm, the encoderlife is infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage. Fully fit 7 inch 800 480 resolution color TFT LCD display with bright colors and high contrast. High measurement voltage range: 1X can measure 040 V, 10X can measure 0400V.
Cursor measurement function: it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is fro-zen. Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis.
Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker. With the screen brightness adjustment function and background gr-id brightness adjustment function, also easy to carry. Specifications: Material: ABS Ana-log band width: 100MHz 2 Number of channels: 2 channels Maximum real time sampling rate: 1GSa/s Vertical sensitivity: 50 mV/div 500 V/div Horizontal time base range: 50S/div 10nS/div Maximum test voltage: 40 V (1X probe), 400 V (10X probe). Storage depth: 240Kbit Input resistance: 1M ADC precision: 8bits Coupling mode: AC/Direct Current Trigger mode: Single, Normal, Auto.Trigger edge: Rising edge/Falling edge External trigger voltage 040 V Extension ports: USB picture export Package size: 340 140 70mm / 13.4 5.5 2.8in Package weight: 1949g / 4.3lb Packing list: 1 FNIRSI-1014D Oscilloscope Host 2 Matching 100MHz Probe 1X and 10X 1 Clip 1 USB Data Line 1 English User Manual. FNIRSI-1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by FNIRSI for the maintenance and R & D industry; this oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100MHz 2. With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals; the built-in high-voltage protection module can tolerate a continuous voltage of up to 400V.
Oscilloscope burnout accident caused by the probe being turned to the 10X position. Large time base scroll mode can monitor slow level changes; Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments; the display is equipped with a 7-inch 800 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient; cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion; extremely convenient screenshot And waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient; the powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis; Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal; built-in 6000mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook. 14Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis 15Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals 16FFT display function, can analyze the spectral characteristics of the signal 17Built in 6000mAh rechargeable lithium batteryFully charged for 4 hours of continuous use at the highest screen brightness 18Memory compression technology, waveform refresh screen does not flicker 19Screen brightness adjustment 20Background grid brightness adjustment 21Ultra thin, easy to carry Specifications: 1Analog band width: 100MHz 2 2Number of channels2 channels 3Maximum real time sampling rate: 1GSa/s 4Vertical sensitivity: 50 mV/div 500 V/div 5Horizontal time base range: 50S/div 10nS/div 6Maximum test voltage: 40 V (1X probe), 400 V (10X probe) 7Storage depth: 240Kbit 8Input resistance: 1M 9ADC precision: 8bits 10Coupling mode: AC/DC 11Trigger mode: Single, Normal, Auto 12Trigger edge: Rising edge/Falling edge 13External trigger voltage 0 40 V 14Display: 7 inch - 800480 15Operating: Capacitive touch screen + gesture 16Extension portsUSB picture export 17Power supply: 6000 mAh lithium battery 18Size: 184mm x 124mm x 50mm 19Total weight:650g. 1 FNIRSI-1013D Oscilloscope Host 2 Matching 100MHz Probe 1 USB Data Line.The item "FNIRSI-1014D 7 LCD 2 Channel Signal Generator Digital Storage Oscilloscope" is in sale since Friday, September 24, 2021. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "huatech2089" and is located in shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.