FNIRSI-1014D Dual Channel Digital Storage Oscilloscope 100MHz 1GSa/s Signal Generator 7 Color LCD. FNIRSI-1014D is a two in one oscilloscope and signal generator. It has comprehensive functions and high practicability.
It is a cost-effective dual channel desktop oscilloscope for the maintenance industry and R & D industry. The oscilloscope has a real-time sampling rate of 1GSa/s and 100MHz2 analog bandwidth; complete trigger function (single time/normal/automatic), both for periodic analog signal and aperiodic digital signal can be used freely; built in DDS function signal generator and the industry's original chopping output (at 2.5vpp), all signal frequency step is 1Hz, support 14 kinds of standard function signal and a customizable chopping signal, chopping. The output device intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal generator, which can store up to 1000 customized cut-off signals; the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear. Large time base scrolling mode, which can monitor slow level changes; equipped with efficient one automatic button, which can display the measured waveform without tedious adjustment; display high-definition LCD with 7-inch 800480 resolution; cursor measurement function, when manually reading amplitude and frequency parameters, it does not need to read the background scale unit and quantity, and it does not need to convert to directly get peak to peak and frequency.The fuselage is equipped with USB interface, which can be connected with the computer to realize the sharing of its own screen collected pictures and the computer, which is convenient for secondary analysis; graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals; FFT viewing function can estimate the harmonic component of signals; graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals. 1: Built in DDS signal generator, support 12 kinds of function signal. 2: Industry's original [Collect output signal] function, can store up to 1000 collected signals. 3: Targeted high intelligent decoding algorithm, the encoder life is infinite.
4: Intelligent anti-burn, 1X Can withstand up to 400V withstand voltage. 5: 100MHz analog bandwidth at 1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz). 6: Fully fit 7 inch 800480 resolution color TFT LCD display with bright colors and high contrast. 7: High measurement voltage range, 1X can measure 040 V, 10X can measure 0400V, 100X can measure 04000V. 8: Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period.9: Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. 10: Complete triggering function (single, normal, automatic). 11: At any time, the waveform display (pause function) is frozen. 12: Equipped with high efficiency one automatic button. 13: One-button waveform storage and screenshot.
14: Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. 15: Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. 16: Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. 17: Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
18: FFT display function, can analyze the spectral characteristics of the signal. 19: Memory compression technology, waveform refresh screen does not flicker. 21: Background grid brightness adjustment. 22: Ultra thin, easy to carry.Number of channels: 2 channels. Maximum real time sampling rate: 1GSa/s. Vertical sensitivity: 50mV/div 500 V/div.
Horizontal time base range: 50S/div 10nS/div. Maximum test voltage: 40V (1X probe), 400V (10X probe). Trigger mode: Single, Normal, Automatic. Trigger edge: Rising edge/Falling edge.External trigger voltage 0-40 V. Display: 7 inch - 800480. Extension ports: USB picture export. Size: 340mm x 140mm x 70mm. 1 x FNIRSI-1014D oscilloscope host.
2 x Matching 100MHz probes (1X and 10X). 1 x 5V2A Power Adapter. 1 x USB data cable.
1 x User manual (English).