- Index
- Asin
- Bandwidth
- Brand
- Model
- 1013d (69)
- 1014d (17)
- 6074bc (47)
- 6104bd (13)
- 6204bd (12)
- Digital Oscilloscope (12)
- Ds213 (24)
- Dso2c10 (29)
- Dso2c15 (21)
- Dso2d15 (17)
- Dso4254b (12)
- Dso4254c (15)
- Dso5102p (21)
- Fnirsi-1014d (50)
- Hantek6104bc (16)
- Jds2022a (25)
- Oscilloscope (13)
- Storage Oscilloscope (23)
- Vds1022i (20)
- 2230 (17)
- Other (2215)
- Sample Rate
- 00msa / S (3)
- 1 Gsa / S (33)
- 10 Msa / S (3)
- 100 Mhz (3)
- 100 Msa / S (6)
- 100msa / S (4)
- 1gs / S (9)
- 1gsa / S (81)
- 1msa / S (2)
- 2.4msa / S (17)
- 200 Mhz (3)
- 200 Msa / S (7)
- 200msa / S (16)
- 250ms / S (5)
- 250msa / S (4)
- 300msa / S (2)
- 48ms / S (8)
- 500 Msa / S (7)
- 500ms / S (2)
- Less Than 200msa / S (12)
- Other (2461)
- Type
FNIRSI DPOX180H Phosphor Digital Oscilloscope 2CH 180MHz Signal Generator 20MHz
FNIRSI DPOX180H Handheld Phosphor Digital Oscilloscope 180MHz -3DB 50000wfms/s Dual Channel 20Mhz Signal Generator ZOOM XY FFT Handheld 2in1 dual channel digital fluorescence oscilloscope signal generator. As an oscilloscope, it has 180MHz-3DB analog bandwidth and 500MSPS real-time sampling rate. Built-in 20MHz DDS function signal generator with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sinewave frequency up to 20MHz, other waveform frequency up to 10MHz. Built-in 120Mbit storage space, up to 250 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data.
Connect to computers via USB cable, you can directly view or copy the saved BMP imaging file inside the oscilloscope. 2in1 Design with Reliable Quality? Handheld 2in1 dual channel digital fluorescence oscilloscope signal generator. 2.8-inch IPS display with clear definition, color temperature display and multi-level grayscale display capability; waveform changes can be clearly seen in one minute.Better capture the signal so that there is nowhere for abnormal waveforms to hide. With complete trigger function, automatic, single, regular three trigger modes; rising-edge trigger mode, falling-edge trigger mode. Adapts high-frequency, low-frequency, and high-noise signals for clean, stable waveforms.
Large Time Base Scrolling Mode? In scroll mode, slow level changes can be monitored in real time. Provide an additional amplification time base. It can provide 21000 times amplification view effect in running or pause state.
Support digital fluorescence technology, dual-channel generate a closed curve graph can be used to compare the amplitude, frequency, phase of two groups of signals. 5mV High Sensitivity Ultra-high Waveform Signal-to-Noise Ratio? The analog front-end uses outstanding shielding measures and a stable feedback system; all parts with sources of interference are located away from the analog front-end. The analog front end has a built-in switchable 20MHz hardware bandwidth limiting component, and the -3DB attenuation bandwidth is 20MHz when turned on. Intercept part or all of various signals measured by oscilloscope to be used as output signal of signal generator, up to 500 custom signals can be stored.
The analog front-end input stage is designed with high-voltage resistance, and the overall design can achieve 400V burn-in resistance in any gear. Built-in 3000mah high-capacity rechargeable lithium battery, up to 4 hours of life, can be set from 5 minutes to 2 hours of timeout time, support 5V2A quick charging. Manual cursor measurement, equipped with efficient one-key auto adjustment function, signal measurement is easy and fast; cursor accurate measurement of waveform parameters. Qualitative overview of the current signal spectrum components. Firmware Upgrade & Imaging Export?
Connect to computers via USB cable, copy the system imaging file iso to U disk for upgrade, also you can directly view or copy the saved BMP imaging file inside the oscilloscope. Name: 2in1 Oscilloscope Signal Generator.
Battery type: 1 built-in 3000mAh battery (included). Trigger edge: rising edge/falling edge. 20M hardware bandwidth limit: support. ZOOM scaling time base: support. Adjustable Automatic Bandwidth Limiting: Support.Color temperature display technology: Support. High voltage anti-burning: all gears withstand voltage 400V.
Screen size: 2.8 inch. Screen display process: IPS full view. Expansion interface: USB transmission interface.
Auto shutdown: 5 minutes 2 hours. Firmware upgrade: support iso imaging upgrade. Standby time: 34 hours on full charge. Signal generator: 14 kinds of standard function signal. Item size: 135 90 40mm / 5.31 3.54 1.57in.
Package size: 245 147 80mm / 9.65 5.79 3.15in. Package weight: 680g / 1.50lb Packing List: 1 2in1 Oscilloscope Signal Generator 2 Probe 1 USB Cable 1 Guideline. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you. If the product malfunctioned under proper usage per instructions. 30 days evaluation and investigation takes placed after receiving your return item.
A brand new replacement unit will.