Hantek 2C10DSO Without AWG Digital Storage Oscilloscope AU SHIP

Hantek DSO2C10 Digital Storage Oscilloscope 2 Channel 100MHz 1GSa/S Without AWG. 1 Dual Independently Controlled Channels. 2 Wide Signal Bandwidth: 150MHz. 3 Super High Sampling Rate: 1GSamples/s. 4 Deep Storage Memory: 8MSamples.

5 Vertical Range: 2mV/div 10V/div. 7 Built-in 25MHz Arbitrary Function Generator (On DSO2D10 & DSO2D15 Only). 8 Trigger Type: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, & IIC. 9 BUS Decoding and Protocol Analysis Functions: RS232/UART, I2C, SPI, CAN, LIN, etc.

10 Versatile Data Saving Functions in Multiple Formats: Settings, Signal and Reference Waveforms, CSV File for Data Values, Waveform Snap Shots, etc. 11 Build-in Dual Channel 3-Digit Voltage Meters and One 6-Digit Frequency Counter. 12 Automatic Measurements for 32 Types of Real-Time Statistic Parameters: Maximum, Minimum, Standard Deviation, etc. 13 Can Set Trigger Threshold and Measure Major Parameters Automatically. 14 Remotely Controllable Through SCPI (Standard Commands for Programable Instruments). 15 USB Host/Device for Transferring Data and Connecting to a USB Equipment. 2ns/div to 100s/div, in a 1, 2, 5 sequence. (1 sample interval + 100ppm × reading + 0.6ns).

(1 sample interval + 100ppm × reading + 0.4ns). Sample interval = s/div ÷ 200. 8-bit resolution, each channel sampled simultaneously. 2mV/div to 10V/div at input BNC. Selectable Analog Bandwidth Limit (Typical).

±3% for Normal or Average acquisition mode, 10V/div to 10mV/div. ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div.

Window Function Types: Rectangle, Hanning, Hamming, Blackman, Bartlett and Flat Top. Voltage Measurement Repeatability, Average Acquisition Mode. Under the same setting and environment, =16 waveforms are sampled, ? V of any two averages. ± (3% × value + 0.05 div).

Note: Bandwidth reduced to 6MHz when using a 1X probe. 1GSa/s (single channel), 500MSa/s (dual channels). Normal, Peak, Average & High Resolution.

Up to 2000 waveform per second per channel (Normal acquisition mode, no measurement). Upon single acquisition on all channels simultaneously. After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128. Maximum 8M for single channel (4K, 40K, 400K, 4M, 8M optional). Maximum 4M for dual channels (4K, 40K, 400K, 4M optional). Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, lIC. ±5 divisions from the center of the screen. ±5 divisions from the center of screen. 0.2 div × volts/div within ±4 divisions from the center of the screen. ± (Set value × 6% + 40mV). Rising, Falling, Rising & Faling. ScanLine, LinrNum, OddField, EvenField and AllField.

0: low level; 1: high level; X: ignore. Start, Stop, Data, Parity Error, COM Error. 5 bit, 6 bit, 7 bit, 8 bit. Interval Field, Sync Field, Id field, Sync Id Error, Identifier, Id and Data. Start Bit, Remote Frame, Data Frame Id, Frame Id, Data Frame Id A, Error Frame, All Error, Ack Error, Overload Frame.

10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000,1000000. 4, 8, 16, 24, 32. Start Bit, Stop Bit, No Ack, Address, Restart, Address and Data.

20pF ± 3pF, 1MO ± 2%. PkPk, Frequency, Average, Max, Min, Period, Vtop, Vmid, Vbase, Vamp, RMS, R-Overshoot, PeriodRms, F-Preshoot, PeriodRms, PeriodAvg, RiseTime, FallTime, +Width.

Preshoot, BWidth, FRF, FFR, LRR, LRF, LFR and LFF. DC RMS, AC RMS, DC. Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop. Show only or show all. 9 types of files can be saved and recalled internally, including settings, waveforms, and references.

CSV file, BMP picture (24 bit). Sine, Square, Ramp, Exponential, Noise, DC. 100µV or 3 bits, take the greater one.

Support PC download and external memory recall. 50 O + 1%, high impedance. 7 inchs TFT (diagonal liquid crystal). 800 (horizontal) × 480 (vertical) pixels. 16 million colours (24 bits true colour).

Minimum, 1s, 5s, 10s, 30s, infinite. (±10%), 45Hz to 440Hz, CAT. (±10%), 45Hz to 66Hz, CAT. 0 to 50 °C (32 to 122 °F).

40 to 159.8 °F. = +104°F (= +40°C): =90% relative humidity. 106°F 122°F (+41°C 50°C): =60% relative humidity. 3,000m (10,000 feet). From 50Hz to 500Hz, 10 minutes on each axis.

From 5Hz to 500Hz, 10 minutes on each axis. 318 × 110 × 150mm (L × W × H). Please feel free to send us messages, we are all ears. About this instrument: our company, Analog Technologies, Inc. About us: Our company, Analog Technologies, Inc.

Was started as an R&D firm in January 7, 1997, in Novi, Michigan, a small town 25 miles from Detroit. After 24 years hard working, we have established branches in San Jose, California, USA; Sydney, Australia; and Anshan, Liaoning, P. We have 3 departments: R&D, Production and Trading. Our goal is to make our customers happy and grow our company to a bigger one. This item is in the category "Industrial\Test, Measurement & Inspection\Analysers & Data Acquisition\Oscilloscopes & Vectorscopes".

The seller is "analogti" and is located in this country: AU. This item can be shipped worldwide.

MPN: 2C10
Maximum Real-Time Sampling Rate: 1 GSa/s
Brand: Hantek
Oscilloscope Type: Digital Oscilloscope
Maximum Bandwidth: 100 MHz
Product Type: Oscilloscopes