Hantek 80-250MHz Digital Oscilloscope 4CH 1GS/s +64K Digital Storage + EXT + DVM

4CH digital storage oscilloscope, 100MHz bandwidth, minimum measurement range 500V /div, 1GS/s sample rateadvanced digital trigger system, high trigger sensitivity, low trigger jitterhigh resolution and 7 inch 64K color TFT(800480). 4CH oscilloscope + EXT + DVM + auto range function.

100MHz bandwidth, minimum range is 500V /div and 1GS/s sample rate. Over 32 types of auto measurement function. Advanced digital trigger system, high trigger sensitivity. Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc.

Integrated USB Host/Device, convenient to communicate with PC. Support a variety of SCPI remote control command.

Stable and reliable quality, sturdy and durable. Maximum 64K samples per single-channel. Maximum 32K samples per dual-channel (4K, 32K optional). Sample Rate and Delay Time Accuracy.

Delta Time Measurement Accuracy (Full Bandwidth). Single-shot, Normal mode ±(1 sample interval +100ppm × reading + 0.6ns).

>16 averages ±(1 sample interval + 100ppm × reading + 0.4ns). Sample interval = s/div ÷ 200. 8-bit resolution, each channel sampled simultaneously. 500V/div to 10V/div at input BNC. Selectable Analog Bandwidth Limit, typical.

Rise Time at BNC, typical. ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div. ±4% for Normal or Average acquisition mode, 5mV/div to 500V/div. Note: Bandwidth reduced to 6MHz when using a 1X probe.

Normal, Peak Detect, Average and HR. Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement). Upon single acquisition on all channels simultaneously. After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128.

±4 divisions from center of screen. 0.2div × volts/div within ±4 divisions from center of screen.

± (6% of setting + 40mV). ScanLine, LinrNum, OddField, EvenField and AllField. 0: Lower level; 1: High level. Start, Stop, Data, Parity Error, COM Error. 5 bit, 6 bit, 7 bit, 8 bit. Interval Field, Sync Field, Id field, Sync Id Error, Identifier, Id and Data. Start Bit, Remote Frame, Data Frame Id, Frame Id, DataFrame Id A, Error Frame, All Error, Ack Error, Overload Fram. 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000. 4, 8, 16, 24, 32.

Start, Stop, No Ack, Address, Data, Restart. Voltage difference between cursors: V Time difference between cursors: T Reciprocal of T in Hertz (1/T). Frequency, Period, Average, Pk-Pk, RMS, PeriodRms, Min, Max, RiseTime, FallTime, + Width, - Width, + Duty, - Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, PeriodAvg, FOVShoot, RPREShoot, BWidth, FRR, FFF, FRF, FFR, LRR, LRF, LFR and LFF.

7 inch 64K color TFT (diagonal liquid crystal). 800 horizontal by 480 vertical pixels. About 2Vpp into 1M load. US Plug / EU Plug (Optional). US: 100-120VACRMS(±10%), 45Hz to 440Hz, CAT EU: 220-240VACRMS(±10%), 45Hz to 66Hz, CAT. +104°F(+40°C): 90% relative humidity. 106°F122°F (+41°C 50°C): 60% relative humidity.

Oscilloscope Size: 31.8 11 15cm / 12.5 4.33 5.9in(L W H). Oscilloscope Weight: 2.9kg/ 6.4lb. Package Size: 38.5 20.5 25.5cm / 15.1 8.1 10in(L W H). Package Weight: 3.97kg/ 8.75lb.

Please read the instruction manual in CD carefully to avoid injury and prevent damage to this product. The item "Hantek 80-250MHz Digital Oscilloscope 4CH 1GS/s +64K Digital Storage + EXT + DVM" is in sale since Sunday, December 13, 2020. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes".

The seller is "yzhan-695" and is located in Shenzhen. This item can be shipped worldwide.

Bandwidth: 80-250MHz
Brand: Hantek
Channels: 4
Country/Region of Manufacture: China
Maximum Bandwidth: 250 MHz
Maximum Real-Time Sampling Rate: 1 GSa/s
MPN: Does Not Apply
Number of Channels: 4
Type: Analog Oscilloscope