10 Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures. 11 A 3-digit digital voltage meter and a 6-digit hardware frequency indicator.12 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc. 13 2 sets of digital voltmeters. 14 Support threshold testing, free measurements within the screen. 15 Abundant SCPI remote command control. 32 kinds of auto measurements with statistics.
2 sets of DVM, 3-digit digital voltage meter and 6-digit hardware frequency indicator functions. Serial bus trigger and decode, with the protocol monitoring function. X-Y format and display in dual windows. 1GSa/s (single channel) 500MSa/s (two channels).
Display high frequency and random burr. Average waveform, times: 4, 8, 16, 32, 64, 128. 2ns/div100s/div 1, 2, 5 step by step. ±0.5 div×minimum time base gear. Sample Rate and Delay Time Accuracy.
Delta Time Measurement Accuracy (Full Bandwidth)Sample Rate and Delay Time Accuracy. Single-shot, Normal mode ±1 sample interval+100ppm×reading+0.6ns.
16 times averages ±1 sample interval+100ppm×reading+0.4ns. ±50ppmat any interval greater than 1ms.Rising time in BNC position (typical). 8 bits resolution, each channel samples simultaneously. +, -, ×, ÷, FFT. Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop. In BNC position = 10Hz. In''normal'' or''average'' acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%. In''normal'' or''average'' acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%. Note: Bandwidth reduced to 6MHz when using a 1X probe.
Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC. ±5 divisions from the center of the screen. ±4 divisions from the center of the screen. 0.2 div×volts/div within ±4 divisions from the center of the screen. Rising edge, falling edge, rising or falling edge.
Scanning line, line number, odd field, even field, all field. 0: low level; 1: high level; X: ignore. Start, Stop, data, Parity ERR, COM ERR. 5 bit, 6 bit, 7 bit, 8 bit. Interval field, synchronization field, ID field, synchronization error, identifier, ID and data.
Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame. 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000. 4, 8, 16, 24, 32. Start bit, stop bit, No Ack, address, restart, address and data. Voltage difference between cursors V.
Time difference between cursors T. Reciprocal of T, in Hertz (1/T).
Frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF. Hardware 6 bits frequency meter. Sine, square, ramp, Exp, noise, DC. 0.1 Hz to 10 MHz.0.1 Hz or 4 bitstake the greater one. ±3.5 V, high impedance.
100 µV or 3 bits, take the greater one. 800 (horizontal)480 (vertical) pixels. 16 million colours (24 bits true colour). Minimum, 1 s, 5 s, 10 s, 30 s, infinite. (±10%), 45Hz to 66Hz, CAT.
T, 3.15A, 250V, 5x20mm. 40+71 °C (-40159.8 °F).
=+104(=+40°C): =90% relative humidity. 106122 (+41°C 50°C): =60% relative humidity. 3, 000m (10, 000 feet). 10 minutes on each axis. 318 x 110 x 150mm (length x width x height).The item "Hantek DSO2C10 Digital Storage Oscilloscope 2CH 150Mhz 1GS/s 7 IN TFT Display" is in sale since Friday, March 26, 2021. This item is in the category "Industrial\Test, Measurement & Inspection\Analysers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "jrprime2015" and is located in China. This item can be shipped worldwide.