Hantek DSO5102B 2CH 100MHz Desktop Digital Storage Oscilloscope 1M Memory Depth

Hantek DSO5102B Digital Oscilloscope Storage 2CH 100MHz 1M Memory depth 1GSa/s 25GSa/s Benchtop Scopemeter. 1GSa/s Real Time sample rate. Large (7.0-inch) color display, WVGA(800x480).

Record length up to 1M. Trigger mode: edge/pulse width/line selectable video/slop/overtime etc. USB host and device connectivity, standard. Four math functions, including FFTs standard. Provides software for PC real-time analysis.

Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K, 16K, 40K optional). 4nS/div-40S/div (in a 2, 4, 8 sequence). 8-bit resolution, each channel sampled simultaneously.

±50V(5V/div), ±40V(2V/div500mV/div), 2V(200mV/div50mV/div)±400mV(20mV/div2mV/div). ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div. Trigger Sensitivity (Edge Trigger Type). DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity. CH1, CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V.

Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times =20ns). CH1, CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV).

Trigger on the rising or falling edge. Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM). From the rising or falling edge Set Time: 20-10s. Internal trigger on edge, pulse width, video or slope. Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz.

Tracing: The voltage and time at a waveform point. Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width. Right angle 7TFT 16-digit color LCD. 16 gears, with the progress bar to show adjustment. USB host and USB slave.

100-120VACRMS(±10%), 45Hz to 440Hz, CAT II 120-240VACRMS(±10%), 45Hz to 66Hz, CAT II. Length: 313mm Width: 108mm Height: 142mm. 2.08KG (exclusive of packing and accessories). To Australia and Canada, by UBI special line, usually need to take 15-20 days. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you.

If the product malfunctioned under proper usage per instructions. 30 days evaluation and investigation takes placed after receiving your return item. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "mrtools4test" and is located in this country: CN.

This item can be shipped worldwide.

Number of Channels: 2
Model: DSO5102B
Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: No
Maximum Real-Time Sampling Rate: 1 GSa / s
Oscilloscope Type: Digital Storage Oscilloscope (DSO)
Memory Depth in each Channel: 1M
Features: Handheld/ Portable, With Probe, With USB
Brand: Hantek
Maximum Bandwidth: 100mhz
Digital Oscilloscope Resolution: 8-bit
UPC: 6935750583012