Intelligent 2 in 1 Digital Handheld Storage Oscilloscope Multimeter Current Volt

Intelligent 2 in 1 Digital Handheld Storage Oscilloscope Multimeter Current Voltage. HD display Screen; White on black; large view angle. MT8206 emphasis on functional combination for field testing process, not to replace the meter. It reflects the high-tech, using a dedicated chip has, as the wavefunction, you can view the waveform signal 20KHz within. As a large number of measuring instruments waveform, you will find MT8206 is the most affordable one.

Analog Bandwidth : ACV/DCV/ACA/DCA 20kHz, 200k high-speed A/D sampling. Digital multimeter with 41-segment analog bar display, 200k high-speed A/D sampling, 4000 counts auto-range. (can be selected manually), one-button switch of graphical waveform display during measurement.

High reliability with panel calibration technology and memory calibration, sparing the need for adjustment with potentiometer. Storing 100 sets of data and 10 waveforms independently.

Capable of holding waveform and data during measurement, easy to view and analyze. Realizing one-button automatic waveform capture, operator-friendly to learn and operate. Displaying historical data and real-time measurement on the same screen with unique record reading mode for easy comparison. Effectively eliminating lead resistance, distributed capacitance or interference signals with relative value measurement (clearing).

Extending battery life with automatic shutdown function. Featuring DC/AC voltage/current, resistance, capacitance/mF (large capacitance). Frequency measurement with 5Hz 5MHz automatic switching range and the maximum input of 380VAC. 10A AC and DC current measurement with protection against voltage error. Capacitance double gear design 0.1nf-100uf gear position: convenient for small capacitors to measure quickly.

10mf gear position: high capacitance and high accuracy are guaranteed. Innovative design of the one-button "silent mode", quiet in mastery. In the off state, press and hold the SELE button for two seconds to turn it on to enter the "silent mode". In the off state, press and hold the SELE button for two seconds to turn it on again, it will exit the "silent mode".

When the meter enters the "silent mode", all beeps and prompt tone will be turned off. Avoid the instrument sleeping in the background and use the battery to cause over-discharge of the battery. The meter without operation for 15 minutes (no rotary switch and button operation) will automatically enter the sleep state. Turn the rotary switch to OFF and then turn it on again, the meter will enter to normal measurement state. When the Instrument is in the off state, press and hold the AUTO button for two seconds to turn it on again, then.

The "auto sleep" function can be cancelled. In the off state, press and hold the AUTO button for two seconds to turn it on and then release it to resume "auto sleep". Tips The main chip and the power of screen display are only turned off when the meter is automatically turned off.

But there is still a part of the circuit working, which will have an operating current of about 4 mA. ACmV small signal waveform measurement.

ACmV small signal waveform measurement, you need to manually select the ACmv range first, then long. Press the "SELE" button to enter the waveform display. Press the"AUTO" button to realize one-button automatic capture fuction and display a stable waveform. When the frequency more than 10 kHz, the one-button automatic capture time will be longer. 1 x Pair of Probes. 1 x Operator's Manual. This handheld scopemeter is a portable tool for waveform measurement. In contrast with analog oscilloscope, desktop digital oscilloscope or digital multimeter.

This multi-purpose station own 2 universal-test instrument functions: Oscilloscope + Multimeter. It can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineers' assistant, is outgoing right-hand product for engineers, features are compactness, beautiful appearance and clear interfaces. It has three trigger modes: Auto, Normal and Single.

You can lock and save the waveform of a non-periodic signal. Its multimeter part uses a dedicated chip (6000-count), which can provide a higher precision.

It is no exaggeration to say that the MDS8207 is one of best 2 in 1 portable test tools(at this price) in outdoor research, production, debugging and repairing and will make you convenient in work! 40MHz Bandwidth and 200MHz real time sampling rate oscilloscope. Multimeter and Oscilloscope Automatic measurement : Magic-tool and essential for test newbie. HD display screen, high-contrast display technology (white character on black background).

DMM functions: true RMS, AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, diode/on-off test, transistor, temperature; maximum/minimum-value displayed at the same time. DSO Automatic Measurement: VPP, Vmax, Vmin, Vavg, Vrms, Frequency. Manual shutdown or automatic shutdown is optional. MDS8207 can store 100 sets of DMM data and 30 sets of DSO data.

The storage location can be arbitrarily selected, so that users can store important waveforms in their desired location for viewing. The measurement waveform signal is very fast. Just press the AUTO button to display a perfect waveform.

MDS8207 can directly measure high and low voltage signals, the highest measurement signal is 2400Vp-p, traditional oscilloscope can only measure low voltage signal up to 300Vp-p. MDS8207 can maintain waveform and analyze waveform. More new functions, waiting for you to discover. 1 x MUSTOOL MDS8207 Multimeter Oscilloscope. 1 x English User Manaul. 1, 200ksps speed A/D sampling with double integral A/D combination, depending on the wavefunction of a key conversion. 2, The automatic waveform capture function, easy operation.

3, The software calibration technology, memory calibration coefficients. 4, Features include DC/AC voltag /current, resistance, capacitance, frequency, diode / continuity test. 5, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 6,128X64 high contrast LCD with LED backlighting. 7, Can choose to automatically shutdown or continuous operation.

8, 20A AC and DC test, built-in 500V/20A explosion proof fuse. Display: 128 x 64 dot-matrixs graphic LCD. Battery: 4 x 1.5V AAA battery (Not included).

Power consumption: less than 20mA. Storage capacity: DMM 100 groups of data, waveform 5 group records.

Environment: 0 ° C + 40C. Storage conditions: -10C + 60C. Dimensions: 186mm x 100 mm x 45mm. Weight: 370g (without other accessories).

Analog Bandwidth: DC AC 10kHz. The maximum real-time sampling rate: 200ksps.

DC voltage: 200.0mV 1000V ± (0.75% rdg + 10dgt). AC voltage: 200.0mV 750V ± (1.0% rdg + 10dgt).

DC Current: 2mA 20.00A ± (1.2% rdg + 10dgt). AC current: 2mA 20.00A ± (1.5% rdg + 10dgt). Resistance: 200.0O 20.00MO ± (1.0% rdg + 5dgt). Capacitance: 20.00nF 200.0µF ± (2% rdg + 10dgt).

Frequency: 2KHz 200KHz ± (1.0% rdg + 5dgt). Diode test: open circuit voltage of about 1.5 V, the maximum test current of about 1.5mA. Continuity Test: determine resistance: about 100O.

Remote control Detection: 38kHz carrier frequency. Transistor Magnification: 30 1000 (annex). 1 x MUSTOOL MT8205 Handheld Storage Oscilloscope Multimeter. 1 x English User Manual. Are you worried about choosing a multimeter as a gift.

For your elders who do some diy regularly. For your friends who is a electrician or profession. For your child who is a student or go to school soon. Please continue to understand our product - MUSTOOL MT99!!!

The highest appearance value smart multimeter until now and more functional Than MUSTOOL MT77!! Upgrade Functions as FollowUpdates(compare with MT77).

High EBTN LCD large screen design. The world's fastest capacitance measurement speed. The resistance measurement range is 1O-10MO. Automatic identification and capacitance measurement of diode on-off gear position.

Ultra-large EBTN LCD, 3-line display, can show 3 test results on the screen, such as voltage, frequency and analog bar. Ultra-thin body, portable hanging hole, comfortable operation and easy to carry. Unibody test leads design, one step to test, no need to plug and pull.

Singe button to start smart identification function, no need to switch gear, say goodbye to cumbersome operation. Back flashlight design, no fear of dark environment. AC and DC voltage test.

Data hold, automatic power off. LIVE: neutral and live wire judgment (live wire check). Valert: dangerous-voltage alarm (non-contact voltage detection). Automatically identify diode and continuity. Fastest measurement speed, especially for testing Capacitance. Min input voltage:0.5V max input voltage:600V input impedance:10M. Min input voltage:1V max input voltage:600V input impedance:10M. Minimum-measurement capacitance 0.5uF Overload protection 250V AC/DC. Less than 1.0V diode automatic identification.

1 x Smart Digital Multimeter. Upgraded to more powerful than MT108. Integration design inside and out!

9999 counts high precision measurement! The 9999counts is a pocket-sized 3 9/10-bit automatic digital instrument. It has the features of stable performance, high precision, high reliability, clear readings, and overload protection. With AAA 1.5V battery-driven, the instrument uses a large-screen LCD display, boost power supply, even in the 2.3V low battery edge, it can guarantee the backlight high brightness, It is easy to carry, is a vast number of users extremely like the instrument. This series of instruments can be used to measure the DC voltage and AC voltage DC current and AC current, resistance, capacitance diode, continuity test, frequency measurement and true RMS measurement and other parameters.

It is an ideal tool for the laboratory, factory, radio enthusiasts and families. Maximum display: 9999 (3 9/10) bits automatic polarity display.

Measurement: double integral A / D conversion. Sampling rate: about 3 times per second. Overrange display: the most significant bit was "0L".

Power supply: 2 x AAA 1.5V battery(not included). ±(2.5%+3)>60MOfor reference only. Positive DC current of about 1mA, open circuit voltage of about 3V.

The buzzer buzzes for a long time, and the test resistance is less than(50±20)O. Open circuit voltage is about 3V Press "SELECT" to switch between two functions. 1 x MT109 Multimeter(battery not included). 1 x One Pair Test Pens. 1 x Temperature Test Probe.

Expedited Service is China Post EMS. Please Note that size and color representation are subject to manufacturing variance and may not be exact. Also, note that monitor settings may vary from computer to computer and may distort actual colors. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "store_brave" and is located in this country: CN. This item can be shipped worldwide.

Color: MDS8207
Number of Channels: Check in description
Model: Handheld Storage Oscilloscope Multimeter
Oscilloscope Type: Digital Oscilloscope
Ac Voltage: As Show
Measuring Resistance Range: As Show
Operating Mode: Auto
Measuring Inductance Range: As Show
Display Type: Digital Display
Dc Current: As Show
Dc Voltage: As Show
Measuring Capacitance Range: As Show
Dimensions: As Show
Operating Temperature: 0 - 40 ℃
Diy Supplies: Electrical
Certification: None
Origin: Cn(origin)
Model Number: Mt8206 Mds8207 Mt8205 Mt99 Mt109
Brand: Unbranded
Ac Current: As Show
Maximum Bandwidth: Check in description