LCD Digital Dual 2 Channels Signal Generator Oscilloscope Measurement Tester Kit

  
LCD Digital Dual 2 Channels Signal Generator Oscilloscope Measurement Tester Kit. Our product is US Plug by default, other specifications can be equipped with adapters. Digital multimeter with 200K high-speed A/D sampling, 4000 counts auto-range, one-button switch of graphical waveform display during measurement. High reliability with panel calibration technology and memory calibration, sparing the need for adjustment with potentiometer. Storing 100 sets of data and 10 waveforms independently. Capable of holding waveform and data during measurement, easy to view and analyze. Realizing one-button automatic waveform capture, operator-friendly to learn and operate. Displaying historical data and real-time measurement on the same screen with particular record reading mode for easy comparison. AC voltage bandwidth up to 20KHz. Innovative design for the one-key "silent mode", quiet in mastery.

Effectively eliminating lead resistance, distributed capacitance or interference signals with relative value measurement (clearing). Featuring DC/AC voltage/current, resistance, capacitance/mF (large capacitance), frequency/duty cycle, diode/continuity test.

Frequency measurement with 5Hz5MHz automatic switching range and the maximum input of 380VAC. 10A AC and DC current measurement with protection against voltage error.

Capacitance double gear design 0.1nf-100uf gear position: convenient for small capacitors to measure quickly. 10mf gear position: high capacitance and high accuracy are guaranteed.

Extending battery life with automatic shutdown function. Material: ABS Main color: grey Display: LCD display, 12864dot-matrix graphics, 4000 counts LCD size: 60 40mm / 2.4 1.6in Backlight: white Power: 3 1.5V AA battery (not included) Input resistance: 10M? Auto sleep: yes (the meter automatically auto sleep in 15 minutes without any operation of button) Power consumption: about 40mA Storage capacity: DMM data: 100 groups, waveform record: 10 groups Operation environment: 0? 1 Multimeter Oscilloscope 1 Pair of Test Pens 1 Protective Bag 1 User Manual. Dear customer Pls note our product is not including battery, as battery is forbidden for air fly!

This is 3 1.5V AA battery! Thanks for your understand and cooperation! FNIRSI-1014D is a two in one oscilloscope and signal generator launched by FNIRSI.

It has comprehensive functions and high practicability. It is a cost-effective dual channel desktop oscilloscope for the maintenance industry and R & D industry. The fuselage is equipped with USB interface, which can be connected with the computer to realize the sharing of its own screen capture pictures and the computer, which is convenient for secondary analysis; Li Shayu's graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals; FFT viewing function can estimate the harmonic component of signals; Li Shayu's graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals. 1:Built in DDS signal generator, support 12 kinds of function signal. Function, can store up to 1000 capture signals.

3:Targeted high intelligent decoding algorithm, the encoder life is infinite. 4:Intelligent anti-burn, 1X Can withstand up to 400V withstand voltage. 6:Fully fit 7 inch 800 480 resolution color TFT LCD display with bright colors and high contrast.

7:High measurement voltage range, 1X can measure 0 40 V, 10X can measure 0 400V, 100X can measure 0 4000V. 9:Cursor measurement function, it is convenient to manually measure the period and frequency and voltage.

10:Complete triggering function (single, normal, automatic). 11:At any time, the waveform display (pause function) is frozen. 12:Equipped with high efficiency One-button AUTO.

13:One-button waveform storage and screenshot. 14:Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.

15:Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. 16:Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.

17:Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. 18:FFT display function, can analyze the spectral characteristics of the signal. 19:Memory compression technology, waveform refresh screen does not flicker.

21:Background grid brightness adjustment. 22:Ultra thin, easy to carry. 1:Analog band width: 100MHz 2. 2:Number of channels:2 channels. 3:Maximum real time sampling rate: 1GSa/s. 4:Vertical sensitivity: 50 mV/div 500 V/div. 5:Horizontal time base range: 50S/div 10nS/div.

6:Maximum test voltage: 40 V (1X probe), 400 V (10X probe). 11:Trigger mode: Single, Normal, Auto. 12:Trigger edge: Rising edge/Falling edge.

13:External trigger voltage 0 - 40 V. 14:Display: 7 inch - 800480. 16:Extension ports:USB picture export. 18:Size: 340mm x 140mm x 70mm.

19:Body weight: 1.5kg. 1 x FNIRSI-1014D oscilloscope host. 2 x Matching 100MHz probe(1X and 10X).

1 x 5V2A Power Adapter. 1 x USB data line. 1 x User manual (English). FNIRSI-1013D is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by FNIRSI for the maintenance and R & D industry; this oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100MHz 2. With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals; the built-in high-voltage protection module can tolerate a continuous voltage of up to 400V.

Oscilloscope burnout accident caused by the probe being turned to the 10X position. Large time base scroll mode can monitor slow level changes; Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments; the display is equipped with a 7-inch 800 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient; cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion; extremely convenient screenshot And waveform storage function, built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient; the powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis; Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal; built-in 6000mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook. Intelligent anti-burn, 1X Can withstand up to 400V withstand voltage. Fully fit 7 inch 800 480 resolution color TFT LCD display with bright colors and high contrast.

Capacitive touch screen, the same as the touch mode of modern mobile ipad, is not a resistive touch screen with ancient nail operation. High measurement voltage range, 1X can measure 0 40 V, 10X can measure 0 400V, 100X can measure 0 4000V. Cursor measurement function, it is convenient to manually measure the period and frequency and voltage.

Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen.

Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.

Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal. Built in 6000mAh rechargeable lithium battery, Fully charged for 4 hours of continuous use at the highest screen brightness. Memory compression technology, waveform refresh screen does not flicker.

Ultra thin, easy to carry. Analog band width: 100MHz 2. Number of channels:2 channels. Maximum real time sampling rate: 1GSa/s. Vertical sensitivity: 50 mV/div 500 V/div. Horizontal time base range: 50S/div 10nS/div. Maximum test voltage: 40 V (1X probe), 400 V (10X probe).

Trigger mode: Single, Normal, Auto. Trigger edge: Rising edge/Falling edge.

External trigger voltage 0 - 40 V. Display: 7 inch - 800480.

Operating: Capacitive touch screen + gesture. Extension ports:USB picture export.

Power supply: 6000 mAh lithium battery. Size: 184mm x 124mm x 50mm. 1 x FNIRSI-1013D oscilloscope host.

1 x 5V2A Charger(Include USB data line). Intelligent anti-burn, 1X can withstand up to 400V withstand voltage. Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation. High measurement voltage range, 1X can measure 040V, 10X can measure 0400V, 100X can measure 04000V. Up to 12 parameters measurement:VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period. Built in 6000mAh rechargeable lithium battery, fully charged for 4 hours of continuous use at the highest screen brightness. Material: ABS Color: black+white Analog band width: 100MHz 2 Number of channels: 2 channels Maximum real time sampling rate: 1GSa/s Vertical sensitivity: 50 mV/div500 V/div Horizontal time base range: 50S/div10nS/div Maximum test voltage: 40V (1X probe), 400V (10X probe) Storage depth: 240Kbit Input resistance: 1M ADC accuracy: 8bits Coupling mode: AC/DC Trigger mode: Single, Normal, Auto Trigger edge: Rising edge/Falling edge External trigger voltage: 040 V Display: 7 inch - 800480 Operating: Capacitive touching screen + gesture Extension ports: USB picture export Power supply: 1 lithium battery, 6000mAh (included) Item size: 184 124 50mm / 7.2 4.9 2.0in Package size: 230 150 60mm / 9.1 5.9 2.4in Package weight: 1000g / 2.2lb. 1 1013D Oscilloscope Host 2 Matching 100MHz Probe (1X and 10X) 1 USB Data Line 1 User Manual (English). Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defense, embedded systems, computers, research and education. 1 2 channels which are respectively controlled by independent knobs 2 100 MHZ and 150MHZ analog channel bandwidth 3 Sampling rate up to 1 GSa/s 4 8M memory depth 5 Vertical range 2mV/div 10V/div 6 Built-in 1 CH 25MHz waveform generator (DSO2D10) 7 Vertical resolution: 8bit 8 Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC 9 BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN 10 Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures 11 A 3-digit digital voltage meter and a 6-digit hardware frequency indicator 12 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc. 13 2 sets of digital voltmeters 14 Support threshold testing, free measurements within the screen 15 Abundant SCPI remote command control 16 USB Host/Device. DSO2C10 have no waveform generator function!

Immediately you paid for the order. Communication always is best way to solve problem. We accept any return in 30 days that we promise.

Please never return the parcel without agreement. From us, it is no possible for us to get the parcel. We at strive to give all of our customers a 5 star service.

As this helps us maintain a quality service. Communication is very important, we believe we can resolve all the problem with you. It's our pleasure to answer any questions you have.