Multifunction large screen series handheld digital storage oscilloscope JDS3012

  
Multifunction large screen series handheld digital storage oscilloscope JDS3012. According to the battery 2. According to state trigger 3.

Display the current waveform in memory location 4. Show the level of time 5. Displays the wait time trigger signal 6.

According to signal amplitude 7. Display, frequency signal cycle 8. According to duty ratio 9. According to channel 1 11. According to channel 1 voltage notch 12. According to the relative horizontal displacement 13. The grid Functional check: First of all to the oscilloscope to do a quick examination to determine whether the instrument work is very normal Necessary. Please follow the following steps: 1. After confirm the oscilloscope has been installed on the battery, long press on the oscilloscope panel "PRW" button, Until when they hear the buzzer rang it let go. Set the switch on the oscilloscope probe to 10 x and will probe and oscilloscope channel 1 The connection.

Aim the probe on the connector slot CH1 coaxial cable splice pieces of the convex Press key, can be connected, and then spin to the right to tighten the probe. Place the probe of the probe and grounding clip connected to the corresponding connection end of the signal generator (suggest enter 1 KHZ, about 3 v peak value of square wave). Set the CH1 menu attenuation coefficient of the probe is 10 x (CH1 - > F3 key order Select 10 x).

Press the AUTO button and wait for a moment, this screen will display frequency 1 KHZ, peak value to 3 v square wave signal. Close the CH1 and CH2, repeat steps 2 and 3. What in Package: 1 x JDS3012A series handheld digital storage oscilloscop. We are not responsible for undeliverable address. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED.

If you have any special request, please kindly advise us once place order. We will be happy to assist you. We would try our best to serve you with any question / problem. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Oscilloscopes & Vectorscopes". The seller is "yonghon0*" and is located in this country: CN.

This item can be shipped worldwide.

1. Brand: Unbranded
2. Model: JDS3012A
3. Type: Digital