FPGA+MCU+ADC hardware structure can ensure a strong waveform capture function. Support waveform preservation, view and export analysis. The digital oscilloscope has a built-in 4000mAh lithium battery with a battery life of about 4 hours, and supports Type-C interface charging to ensure uninterrupted work. Backlight: backlight brightness can be set. Battery: 4000mAh lithium battery (built-in).
Trigger type: rising edge/falling edge. Trigger level range: 8 cells (positive and negative). Storage depth: up to 64kByte. Bandwidth Limit: Supports 20MHz limit.
Measurement data: period, frequency, peak-to-peak, maximum value, minimum average value, RMS value, amplitude, duty cycle, pulse width. Different waveform output frequency: sine wave: 10MHZ, other waveforms 5MHZ.
Waveform amplitude: 0.1V-3.0V. Duty cycle of square wave: 0-100%. DC voltage: 1.9999V/19.999V/199.99V/1000.0V, accuracy ± (0.5%+3). AC voltage: 1.9999V/19.999V/199.99V/760.0V, accuracy ±(1%+3). DC current: 19.999mA/199.99mA/1.9999A/9.999A, accuracy ±(1.2%+3).AC Current: 19.999mA/199.99mA/1.9999A/9.999A, accuracy ±(1.5%+3). /, accuracy ±(1.5%+3). Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF, accuracy ±(2.0%+5). 9.999mF/99.99mF, accuracy ±(5.0%+20). 1 x Type-C Data Cable.
1 x Alligator Clip Probe. Local pick-up is unavailable at the moment. Leaving correct address can minimize delay. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.
We highly value and appreciate your business. All messages will be answered within 24 office hours.
We are committed to resolve all issues in a friendly and satisfactory manner. If you do not get a response from us, then please check your junk or spam mailbox.