ONE Hantek DSO4254C Digital Storage Oscilloscope 64K 4CH 250MHz signal source

ONE Hantek DSO4254C Digital Storage Oscilloscope 64K 4CH 250MHz signal source. 4CH oscilloscope, with 1CH Arbitary/function waveform generator, independent keys of oscilloscope and waveform generator which is easy to operate at the same time.. 80-250MHz bandwidth, minimum measurement range 500V /div1GS/s sample rateadvanced digital trigger system, high trigger sensitivity, low trigger jitterhigh resolution 7 inch 64K color TFT 800480. 80-250MHz bandwidthminimum range 500V /div1GS/s sample rate. Over 32 types of auto measurement function. Advanced digital trigger system, high trigger sensitivity. Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc. 25MHz, 12BitS resolution, 200MHz DDS, ARB/square wave/sine wave/. Easy to simulate the sensor.

Integrated USB Host/Device, convenient to communicate with PC. Support a variety of SCPI r. Support optional RS232 port, LAN port, HDMI port, touch screen, WIFI communication, SD card storage.

Stable and reliable quality, sturdy and durable. Maximum 64K samples per single-channel. Maximum 32K samples per dual-channel (4K, 32K optional). ± (1 sample interval +100ppm × reading + 0.6ns). ± (1 sample interval + 100ppm × reading + 0.4ns).

Sample interval = s/div ÷ 200. 8-bit resolution, each channel sampled simultaneously. 500V/div to 10V/div at input BNC.

Selectable Analog Bandwidth Limit, typical. Rise Time at BNC, typical. ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div.

±4% for Normal or Average acquisition mode, 5mV/div to 500V/div. Note: Bandwidth reduced to 6MHz when using a 1X probe. Normal, Peak Detect, Average and HR. Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement). Upon single acquisition on all channels simultaneously.

After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128. ±4 divisions from center of screen.

0.2div × volts/div within ±4 divisions from center of screen. ± (6% of setting + 40mV). ScanLine, LinrNum, OddField, EvenField and AllField. Dear friend, your happy is very important to me!

We check all items before we send it out, to ensure every item sent to you is perfect. We very glad to solve all problem with you. If you Not satisfied with our item. Items must be return to us within 14 days after you receive.

Do write to us and give us an opportunity to address your concerns firstly. If it is our quality's problem, we will repair it and send the repaired item to you for free of charge. If the damage is made by wrong operation, we will ask for maintenance cost. We will be happy to assist you. We would try our best to serve you with any question / problem. We stand behind every product we sell. However, we will try our best to minimize it. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here.

The item "ONE Hantek DSO4254C Digital Storage Oscilloscope 64K 4CH 250MHz signal source" is in sale since Thursday, May 14, 2020. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\PLCs & HMIs\PLC Processors". The seller is "development1979*" and is located in China. This item can be shipped worldwide.

Model: DSO4254C
MPN: Does not apply
Brand: Hantek