Oscilloscope Digital SIGLENT SDS1104X HD 4CH, 100 MHz, 2 GSa/s, 100 Mpts Memory

  
SIGLENT SDS1104X HD 4 channel high resolution digital storage oscilloscope is based on 2 GSa/s, 12-bit Analog-Digital Converters and front ends with excellent noise floor performance. With a bandwidth of 100 MHz, it has a maximum record length of 100 Mpts, and display 4 analog channels + 16 digital channels mixed signal analysis ability.

The SIGLENT SDS1104X HD series employs SIGLENT's SPO technology with a maximum waveform capture rate of up to 120,000 wfm/ s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. Tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis and allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS1104X HD.

The large 10.1'' display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly UI design, can greatly improve the operation efficiency. It also supports mouse control, and remote web control over LAN. SDS100X HD can control the USB AWG module or control an independent SIGLENT SDG instrument, scan a devices amplitude and phase frequency response, and display the data as a Bode Plot.

There is also a Vari-level Mode for accurately measuring Power Supply Control Loop Response (PSRR). 12-bit Analog-Digital Convertors with sample rate up to 2GSa/s. 4 analog channels, 100 MHz bandwidth. Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode).

Supports 256-level intensity grading and color temperature display modes. Up to 100 Mpts record length. Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video (HDTV supported), Qualified, Nth edge, Delay, Setup/Hold time.

Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN. CAN FD (decodeonly), FlexRay (decodeonly). Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event.

History waveform record (History) function, the maximum recorded waveform length is 80,000 frames. Automatic measurements on 50+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math, History and Ref. 4 Math traces 2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.

Abundant data analysis functions such as Search, Navigate, Counter, Bode plot and Power Analysis. High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defined masks. 25 MHz waveform generator (optional).

Large 10.1 TFT-LCD display with 1024 × 600 resolution; Capacitive touch screen supports multi-touch gestures. Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Supports SCPI remote control commands. Supports external mouse and keyboard. One channel mode: 2 GSa/s, Two channel mode: 1 GSa/s, Four channel mode: 500 MSa/s.

One channel mode: 100 Mpts/ch, Two channel mode: 50 Mpts/ch, Four channel mode: 25 Mpts/ch. Normal mode : 120,000 wfm/s; Sequence mode : 500,000 wfm/s. Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Delay, Setup/Hold time, Serial.

Serial trigger and decode (Standard). I2C, SPI, UART, CAN, LIN CANFD (Decode Only), FlexRay (Decode Only). 50+ parameters, statistics, histogram, trend, and track supported.

4 traces 2 Mpts FFT, Filter, +, -, x, ÷, ? , Identity, Negation, Absolute, Sign, ex, 10x, ln, lg, Interpolation, MaxHold, MinHold, ERES, Average. Search, Navigate, History, Mask Test, Counter, Bode plot, and Power Analysis.

16-channel; maximum sample rate up to 1 GSa/s; record length up to 10 Mpts. One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts, isolated output. USB 2.0 Host ×2, USB 2.0 Device, 10 M / 100 M LAN, Auxiliary output (TRIG OUT, PASS/FAIL), SBUS (SIGLENT MSO). Passive probe PP510 for each channel. 10.1 TFT-LCD with capacitive touch screen (1024×600).

Digital Oscilloscope SIGLENT SDS1104X HD - 1 pc. USB Cable - 1 pc. Quick Start - 1 pc. Passive Probe (100 MHz) PP510 - 4 pc. Certificate of Calibration - 1 pc.

Power Cord - 1 pc.