Hand-held Tablet Oscilloscope, Portable Digital Storage Oscilloscope Kit 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7 TFT LCD Touch Screen. The 1013D is a full-featured, highly practical, cost effective dual channel flat-panel oscilloscope launched :this oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz 2. With complete trigger function (single /normal/automatic), it can be used freely for periodic analog signals or non-periodic digital signals; the built-in high-voltage protection module can tolerate a continuous voltage of up to 40V. Large time base scroll mode can monitor slow level changes;Equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments; the display is equipped with a 7 800480 resolution high-definition LCD screen, and the operation method is capacitor Screen touch+ gesture operation, extremely convenient;cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters. And you can directly get the peak, peak and frequency without conversion; extremely convenient screenshot And waveform storage function, built-in 1GB storage space can store up to 1000PCS screen shots and 1000 sets of waveform data.
The storage process is simple and fast, save the current waveform anytime. Anywhere with a single touch, no cumbersome prompts and choices. Keep calm The current data is saved in the place.
Which is very convenient; the powerful waveform picture manager supports thumbnail browsing viewing, detailed viewing, page turning, deletion, waveform zooming in, zooming out or moving and etc. The fuselage is equipped with a USB interface, which can be connected to a computer to share its screen shots with the computer. Which is convenient for secondary analysis; Lissajous graphic display function can be used to determine the amplitude, frequency. And phase contrast of two groups of signals; Analysis of the harmonic components of the signal; built-in 6000mah high-quality lithium battery, which can last for4 hours on a full charge. And can be used while charging like a notebook.
·High measurement voltage range, 1X can measure 040 V, 10X can measure 0400V. Up to 12 parameters measurement:VPP, VPV max, Vmin, Vavg, Vrms, Frequent, Duty, Duty-, Time, Time-, Period. This USB oscilloscope is equipped with a USB interface and can be connected to a computer to share its screenshots with the computer, which facilitates secondary analysis. ·7 inches, 800x 480 resolution, bright colors and high contrast displaying.Ultra-thin and easy to carry. ·Equipped with efficient one-button automatic device. The built-in 1GB storage space can store up to 1000PCS screen shots 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out or moving and etc.
·Built-in 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged. Note:Before use, please read the manual attached to the product.
·Widely applicable in the academic experiment, electronic product design, debugging and maintenance, electronic engineering education, etc.