TOOLTOP ET829 3in1 Digital Storage Oscilloscope Multimeter Signal Generator

  

TOOLTOP ET829 3in1 2CH Digital. Oscilloscope Multimeter Signal Generator 250MSa/S 80MHZ. Display resolution: 320 (horizontal) 240 (vertical) pixels.

Display size: 2.8inch TFT color screen diago. Power supply: AC100V-240V, 50Hz/60Hz; DC15W quick charging. Power consumption of the whole machine: Oscilloscope range? Battery: 18650 lithium battery 2000mAh x 2 (included). Auto sleep: the time can be adjusted or turned off, and there will be a sound or display prompt before sleep.

Sound prompt: On/off optional; there are various kinds of voice prompts, such as button sound, high pressure or over-range alarm sound during measurement, and some AI voices that may be added, etc. To turn off the sound, you can choose to. Turn off the sound of the whole machine, or just turn off a selected prompt sound.

Use time: about 10 hours for oscilloscope range, about 20 hours for multimeter ranges. Item size: 100 210 40mm / 3.94 8.27 1.57in. Item weight: 480g / 1.06lb. Package size: 237 185 55mm / 9.33 7.28 2.17in. Package weight: 830g / 1.83lb.

MHz (single channel), 50MHz (dual channel). Maximum real-time sampling rate: 250MSa/s (single channel), 125MSa/s (dual channel). Waveform interpolation: (Sin x) /x. Record length: When single channel, the maximum is 6K; when dual channel, the maximum is 3K. AD converter: 8-bit resolution, simultaneous sampling of each channel.

Vertical scale range: 1 X: 10mV/div-10V/div; 10X: 100mV/div-100V/div. Vertical measurement range: ±4 gri d. Vertical Gain Accuracy: ±3% in "Normal" or "Average" acquisition mode.

Input Coupling: DC, AC, GND. Support probe attenuation factor: 1X, 10X, 100X. Trigger Mode: Auto, Single, Normal. Edges-triggered slope: Rising edges, falling edges, rising edges or falling edges.

Voltage parameter measurement: peak-to-peak, RMS, average, peak, maximum, minimum. Time parameter measurement: frequency, period, duty cycle, positive pulse width, negative pulse width.

Cursors: Voltage difference between cursors, time difference between cursors. Intelligent cursor 1 group, the capture point keeps tracking the current waveform when the cursor moves, and the current cursor position information, voltage difference and time difference are displayed below. Storage capacity: 2000 groups of data, 200 groups of waveform records, with storage file manager.

Filtering: high pass, low pass. Afterglow option: Yes (afterglow effect is required to make Lissajous graphics) After glow selection is divided into multi-level optional.

AI waveform preview: a small window. Is added above the main interface to display the thumbnail of the waveform for preview, and with an indicator to indicate that the current main interface waveform is at a certain position in the entire collected waveform. DC voltage: 600.0mV-1000V, 0.75%rdg + 10dgt.

AC voltage: 600.0mV-750V (TRMS, frequency range:40Hz-1KHz), 1.0%rdg + 10dgt. DC current: 60.00mA/500.0mA, 6.000A/10.00A.

Overload protections: fuse type fuse 500mA/250V, 10A/250V, 1.2%rdg + 10dgt. AC current: 60.00mA/500.0mA, 6.000A/10.00A (TRMS) Overload protections: fuse type fuse 500mA/250V, 10A/250V, 1.5%rdg + 10dgt.

-60.00M, 1.0%rdg + 5dgt. Capacitance: 10.00nF-1.000mF, 2.0%rdg + 10dgt; 1.000mF-100.0mF, 5.0%rdg + 10dgt. Frequency: 10.00Hz-10.00MHz, 1.0%rdg + 5dgt. Diode test: Open circuit voltage is about 3V, maximum test current is about2mA. Amplitude: Fixed-point output, maximum 5Vpp (50?

)--0Vpp, 0.1Vpp, 0.2Vpp, 0.5Vpp, 1Vpp, 2Vpp, 3Vpp, 5Vpp. Square waves pulse width accuracy: ±20nS. 80MHz digital storage oscilloscope (DSO) + 6000counts large capacitance True RMS RMS multimeter (DMM) + 1Hz 5MHz signal generator.

80MHz bandwidth + 250MSa/s sampling rate + 2 channels. Key function and measurement status, user-friendly interface and simple operation.

Ne-key AUTO measurement, automatic display of measurement waveform and automatic zero correction. Storage, up to 200 DS. 0 groups of DMM values are stored/read, and 2000 groups of data are automatically recorded for on-line IC detection. Produce sine wave, triangle wave, square wave signal, frequency, amplitude can be set independently.

Work with oscilloscope function at the same time, constitute a test system. 2.8inch TFT color screen, 320X240.

Resolution with adjustable LED backlight. S, support 15W fast charging, 10 hours long using time.

To realize timing measurement, curve drawing, waveform analysis and FFT transformation. To see the overall waveform of the waveform being measured. Accurate measurement , using Panel Calibration Technology, memory all calibration data, without any potentiometer adjustment.

Multifunctional Design:3 Trigger Modesof Auto, Normal and Single, relative value, data hold, afterglow selection, self-calibration fu. Wide applications: Suitable for electric occasions such as automobile maintenance and power maintenance. 1 Dual Injection Test Lead.

1 Signal Output Clip Wire. Can't guarantee that the package would safely arrives. Unused/unopened merchandise will be fully credited. All emails will be answered within 24 hours.